ADA ProjectDeliverables

From Visual Analytics and Applications
Revision as of 15:30, 6 August 2017 by Akangshab.2016 (talk | contribs)
Jump to navigation Jump to search

Analysis of Rise in Global Temperatures and its Causes Through Interactive Visualizations

Overview

Proposal

Analysis Report

Poster

Application

 

Motivation

Climate change and global warming are material and contemporary issues that are gaining traction from countries all over the world. Global citizens of all ages and economic backgrounds are faced with unwanted effects of climate change today. As the buzz around global warming continues to increase, this contemporary issue has incited many relevant visualisations. Through this project, we analyse the key contributors to climate change namely: Fossil fuel consumption, adoption/rejection of renewable energy, electricity consumption, deforestation rate, and greenhouse gas emissions. The residual impact of these factors to facilitate the rise of global temperature has been captured for 86 countries around the world.

While most contemporary visualisations focus on individual environmental hazards such as increased rates of carbon emissions or the rapid rise in temperature, our analysis attempts to connect the dots to better understand the cause-and-effect nature of global warming. Through our visualisations, we depict the causal effect between the factors which contribute to greenhouse gas emissions and the resulting impact on increase in temperature from the year 1990 to 2012. Furthermore, we attempt to forecast the aforementioned causal effects and the net rise in temperature for ten subsequent years to better understand the variation in each factor over time.

Review and Critique of Prior Work

While most contemporary visualisations focus on individual environmental hazards such as increased rates of carbon emissions or the rapid rise in temperature, our project attempts to connect the dots to better understand the cause-and-effect nature of global warming. For example, a visualisation by the Guardian effectively shows the estimated rate of carbon emissions for each country based on their current rate of emissions.

As carbon emissions are the direct cause of increasing temperatures, some visualisations focus purely on the rise in global temperature and the yearly trends of increase in temperature from 1850-2016.

Another example of a country-specific visualisation by Carbon Footprints of Nations attempts to highlight the environmental footprints of nations for a specific time-period. Such geolocation analysis is important to highlight the regions that are major contributors of global warming.

Design Framework

1. Interface:

In this section, the dashboard containing the visualizations will be described. The dashboard is laid out in separate tabs. The dataset we have turned into visualizations has 3 levels:

  • Level 1: Global level
  • Level 2: Continent level
  • Level 3: Country level
ADA Report 1.JPG
Figure 1

As can be seen in Figure 1, separate tabs have been made use of for each visualization, for a better user interface. By having separate tabs, the user need not scroll up and down and can instead toggle freely between tabs containing visualizations. Maximum screen space has been given to the visualizations. Each tab has a ‘year slider’ which allows users to visualize the data based on the year they are curious to find out about. In addition to the year slider, each tab provides a set of options that the user can switch between for comparison. Parallel coordinates plots can be used to simultaneously analyse data distribution across all variables - Temperature, Electricity consumption, Forest Cover, Fossil fuel consumption, Greenhouse gas emissions, Population and Renewable energy adoption.

The dashboard comprises of Interactive plots that were developed such that users may gain insight on patterns, trends and relationship between different causes, greenhouse gas emissions and temperature over time. The purpose of this dashboard is to provide an application interface which facilitates an interactive analysis of the rise in global temperatures and its potential influencers which include Electricity Consumption, Forest Cover, Fossil Fuel Consumption, Population and Renewable Energy Adoption. Users are encouraged to interact with dynamic visualizations contained in this application and analytically determine the potential influencers and effects of global warming at any geographical level such as continent or country. Some potential areas of exploration are:

  • Global overview of changes in temperature using a Chloropleth world map
  • Continental analysis of change in temperature trends from 1990 to 2022 using the Geofacet plot
  • Country-level overview of the relationship between Average temperature and its influencers using a Parallel Coordinates Plot
  • Interactive Treemap and reactive Bubble plots to deterministically analyse the relationship with between Average temperature of a country and its influencer over a 22-year time period


2. Analytical Visualizations:

The tabs contain visualizations based on hierarchy. The first visualization created is the Choropleth World Map which portrays the temperatures across the world.


2.1. Choropleth World Map:

ADA Report 2.JPG

Figure 2

A choropleth world map is used to depict temperatures worldwide on a yearly basis. Darker colours represent countries with higher temperatures as compared to countries with lighter coloured countries in this map. The map above shows average temperatures for 86 countries in 1990. While this visualization allows a quick overview of countries facing high/low temperatures, it does not show the trend in changing temperatures over the years.

Features of the Choropleth world map:

  • Heat map of the world showing average annual temperature for all of the countries for each year
  • The colours here represent the range temperature in degrees Celsius
  • The countries that are grey here are countries that are not in the current scope of this application
  • By clicking on each country, we can see the name of each country and the average temperature for the chosen year
  • Using the slider at the bottom, we can drag it across to see how temperatures have changed for the countries over time
  • Gives us an overall view of temperatures for each year for the world as a whole


2.2. Geofacet Maps:

ADA Report 3.JPG

Figure 3

An alternative visualization using R’s latest Geofacet package has been made use of to portray continent level analysis. For each continent, this package plots countries in their respective geographical positions and also shows trends in changing temperatures over the years. With this visualisation we have taken the concept of geographical representation of temperature data to a new level using R’s relatively new geofacet package.

Features of the Geofacet maps:

  • Each of the faceted plots are spatially placed in a grid in locations respective to the actual geographic locations of each country on a world map
  • The lines represent the change in temperature over the years
  • From 1990 to 2012, which is the first part of the blue line, shows the actual temperature values
  • The envelope represents forecasted temperature values with 95% confidence interval for the subsequent 10 years for each country
  • Next to each of the geofacet maps, a data table is shown which highlights further information on temperature values for each country with the minimum and maximum temperature. The purpose of the table is to show the variation of temperatures over time in the temperature deviation column
  • This dashboard allows us to gain insight into the change in temperatures for countries in a continent relative to each other


2.3. Parallel Coordinates Plot:

ADA Report 4.JPG

Figure 4

A parallel plot to perform country level analysis by consolidating all factors in one visualization. This chart allows all for comparison of all values in one view. The plot facilitates interactive highlighting to visually analyze and compare variables. The user is provided with additional functionality of being able to drag variables and re-arrange them in the order they prefer.

Features of the Geofacet maps:

  • Each factor mapped to countries with a line
  • The ability to highlight a subset of one of the variable axes, for example, highlighting countries with high temperature to see if any trends can be seen across the other variables
  • Use of a slider at the bottom to see how the values for countries changed over time
  • The benefit of this visualisation is the ability to see all the variables in one place, determining any trends/relationships can be seen across variables
  • The ability to highlight certain areas of the axes mean that we can focus on our key areas of concern.


2.4. Treemap & Bubble Plot:

ADA Report 5.JPG

Figure 5


This tab in the dashboard portrays two visualizations along each other to show country-level analysis. The tree map plot on the left represents average annual temperature in a geographically hierarchical manner. Once we click on a continent we can see the different temperatures across the countries in the continent. On the right, is the bubble plot representing four different factors.

Features of the Geofacet maps:

  • On the x axis we have our influencers, these tabs across the top allow you to change the x axis based on your area of interest
  • The y axis represents temperature across all graphs
  • The size of each bubble represents the emissions for each of the countries
  • The colour of each bubble represents the country itself

The main advantage of this dashboard is the ability to visually see the relationship between the influencers, the emission, and our effect, which is temperature – this was the key aim in building this app. This also helps to set us aside from other visualisations out there, while you drill down further into the actual temperature of the country, you can also quickly get an idea of where that country lies in terms of the consumption/usage of the influencers and their emissions.


Demonstration: Sample Use Cases

The purpose of this section is to provide important demonstrative examples of the usage of this application. There are many possible use cases depending on the areas of interest/concerns of the targeted audience. However, some important sample use cases for this application are as follows.

1. Comparison of Europe and Africa using Geofacet Maps:

Rising temperatures are seen for countries worldwide even though the rate of change is geographically inconsistent. For example, for some countries in Africa, the increase in temperature is more rapid than for countries in Europe.

ADA Report 6.JPG

Figure 6
ADA Report 7.JPG

Figure 7

2. Country-level analysis for China using Bubble Plot

Developing countries such as China has a consistent increase in consumption of electricity and fossil fuels. China has also seen an exponential increase in greenhouse gas emissions (currently the largest contributor to greenhouse gases)

ADA Report 8.JPG

Figure 8
ADA Report 9.JPG

Figure 9


3. Drawing relationships between variables in Asian Countries

Countries in the continent of Asia have high temperatures but low electricity consumption, comparatively high renewable energy adoption. The user is provided with additional functionality of being able to drag variables and re-arrange them in the order they prefer.

ADA Report 10.JPG

Figure 10


Discussion

Climate change has many aspects to it, rise in sea level, melting ice caps, erratic rainfall, but the one factor everyone thinks of is “rise in temperatures”. This is the focus of our application. When we look at existing visualisations related to global warming, be it static visualisations or interactive, we find focus on individual environmental hazards such as increased rates of carbon emissions or the rapid rise in temperature, our analysis attempts to connect the dots to better understand the cause-and-effect nature of global warming. Through our visualisations, we depict the causal effect between the factors which contribute to greenhouse gas emissions and the resulting impact on increase in temperature from the year 1990 to 2012. Furthermore, we attempt to forecast the causal effects and the net rise in temperature for ten subsequent years to better understand the variation in each factor over time.

Our application that we have named as GRIT (Global Rise in Temperature) is a consolidated application that allow us to map this rise in temperature to its causes and observe patterns on world, continent, and country level.

The main advantage of this dashboard is the ability to visually see the relationship between the influencers, the emission, and our effect, which is temperature – this was the key aim in building this app. This also helps to set us aside from other visualizations, while you drill down further into the actual temperature of the country, you can also quickly get an idea of where that country lies in terms of the consumption/usage of the influencers and their emissions.


Future Scope

1. Additional Functions:

With the foundation of the application been created, following is a list of additional functions that can be added:

  • Adding in more countries
  • Adding in more years for improving forecasting results and more up to date actual data
  • The app can be extended to a city/state level. While the city level data was available for the temperature dataset, it was not available for the world bank data sets at this time
  • What if analysis in the context of different eco-friendly strategies that countries are beginning to implement to combat the impact of global warming
  • Increase interactivity across the tabs in the application to allow more seamless application experience
  • Allowing users to upload their own datasets in the future would allow them to consider other influencer/emission/output factors for exploration
  • Along with forecasting we would also like to create a prediction model that draws relationships between the influencers and the corresponding effect on temperature individually


2. Real World Use Cases

In the context of the complete application including the future functionalities, the application can be used by:

  • Climate/temperature analysts as this is a growing concern anyway
  • It can be used for educating people about environmental awareness, especially the global warming naysayers
  • This can be used by governments to plan their environment budgets based on forecasted values